Pause Time; Flash Time - Panasonic KX-TAW848 Programming Manual

Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
2.7.7 [1-1] Slot—LCO Card Property
Feature Manual References
1.3.1 Caller ID

Pause Time

Specifies the length of a pause.
Default
1.5 s
Value Range
1.5 s, 2.5 s, 3.5 s, 4.5 s
Maintenance Console Location
2.7.8 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
1.8.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.13.4 Pause Insertion
1.16.2 Special Carrier Access Code

Flash Time

Specifies the length of a flash signal.
Default
608 ms
2.7 [1] Configuration
PC Programming Manual 87