Dialing With Dds Keys; Ending A Call; Rejecting A Call; Turning The Microphone On And Off - Siemens HiPath 500 Operating Instructions Manual

Basic functions
Step by Step
Reject call
44

Dialing with DDS keys

Prerequisite: You have saved a number on a sensor key
page 84.
S
Press the programmable repdial key.
If the required phone number is on a different level, first
press the programmed sensor key to shift levels "Layer
X".
You can press the DDS key during a call and au-
tomatically initiate a callback

Ending a call

\
Replace the handset.
s
Press the key shown.
or
n
Press the key shown.

Rejecting a call

The phone is ringing. The caller is displayed.
Select and confirm the option shown.
The connection is cleared down. The caller receives the
message "Currently not possible".

Turning the microphone on and off

To prevent the other party from listening in while you
consult with someone in your office, you can temporari-
ly switch off the handset microphone or the handsfree
microphone. You can also switch on the handsfree mi-
crophone to answer an announcement via the
page 56 telephone speaker.
Prerequisite: A connection is set up, the microphone is
activated.
p
Press the key shown. The LED lights up.
or
p
Press the lit key. The LED goes out.
page 45.