Making And Answering Calls; Answering A Call With The Handset; Answering A Call With The Speaker (Speakerphone Mode) - Siemens HiPath 500 Operating Instructions Manual

Making and Answering Calls

Step by Step
Speaker
Speaker
Speaker
20
Making and Answering Calls
Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone
rings once every four seconds (single-tone se-
quence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance tele-
phone, your telephone rings three times in rapid
succession every four seconds (triple-tone se-
quence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
The number or the name of the caller appears on the
display.

Answering a Call with the Handset

The telephone rings. The caller appears on the screen.
n
Lift the handset.
Ending the call:
t
Replace the handset.
or
Press the key.
Answering a Call with the Speaker
(Speakerphone Mode)
The telephone rings. The caller appears on the screen.
Press the key. The LED lights up. Use speakerphone
mode.
u v
or Raise or lower the volume. Keep pressing the keys until
the desired volume is set.
Ending the call:
Press the key. The LED goes out.