Drum Unit And Toner Cartridge Installation - Toshiba E-studio170F Quick Start Manual

3.INITIAL PRINTING SUPPLIES INSTALLATION (Cont.)

Drum Unit and Toner Cartridge Installation

IMPORTANT:
When you use a toner cartridge of our recommendation, the facsimile machine can detect whether or not
the cartridge is inserted in the machine and alert the user when the amount of toner is low or needs
replacing. As the facsimile machine does not start printing when the toner is not inserted or when the
amount of toner is insufficient, loss of received data can be prevented. If a toner cartridge other than that of
our recommendation is used, the machine may not be able to detect whether the toner cartridge has been
inserted or if the toner amount is sufficient, and printing is not possible using the default setting.
If you want to use a toner cartridge other than that of our recommendation, please inform our service center.
3
The service center will change the machine setting to cancel the detection function. Please note, however,
that when the setting is so changed, the machine will start printing even if a toner cartridge is not inserted
or the toner amount is insufficient. Consequently, the printout may not be satisfactory and the received data
may be lost.
1
Open the Front Cover
- Hold the Front Cover by the grips on both sides of its upper part
and pull it down to open it.
Do not pull the Front Cover too strongly when opening it.
2
Prepare a Toner Cartridge
- Mix the Toner by shaking the Toner Cartridge back and forth.
Avoid touching the toner to your clothing since toner
cannot be removed easily.
3
Remove the protective cover from the
Toner Cartridge
Do not touch the Development Roller of the Toner Cartridge. The
image quality could be degraded.
28
3.SETUP FLOW