T1 Line - Panasonic DBS 576 Technical Manual
Supports version 5.1, section 700 feature operation
Hide thumbs
Also See for DBS 576:
- Technical manual (770 pages) ,
- User manual (102 pages) ,
- Quick reference (4 pages)
Table of Contents
Advertisement
Chapter 3. System Features
6
Dialed No. (24 digits max. including 0-9, *, # Cannot display Flash or Pause. If a number is hidden, *
will appear instead of digits. * will stay with the call even if the call is transferred. For Format 2, an I
Proceeds the digits if it is an incoming call.)
7
Accounting Code (10 digits max.)/Verified Account Code (Verified Account Code table number
V001 to V500)
8
DISA Security Code ID (DISA ID Code table number D001-D016)
9
Caller Data (Formats #2 and #3 only) (Format #2: Max 12 digits, Format #3: Max 16 digits)
ISDN Charge Data (Format #2 only - originator number applies to ISDN only) - Not used (Format # 2
10
only) Future Use
Incoming Ringing Time (Formats #2 and #3 only) (MM=00 to 59 / SS=00 to 59)
11
ISDN B-channel number (Format #3 only) (bb = None (space) or 01 to 30)
13
Carriage Return Line Feed
12
Related Programming
•
FF2: SMDR for Outbound Calls (for Analog, E&M Tie Line, and ISDN)
•
FF2: SMDR for Inbound Calls (for Analog, E&M Tie Line, and ISDN)
•
FF1-006: Serial Port Receive Data
•
FF1-009: SMDR Output Format
Hardware Requirements
•
A printer or external call accounting system is required to receive SMDR data.
Considerations
•
A call must be answered to generate SMDR data (e.g., answered by voice mail, call pickup, etc.)
•
You can specify which type of SMDR data format is sent (i.e., either Format 1, 2, or 3).
•
(SMDR Format #3 only) When a call is received from a non-ISDN line, the B channel entry is
blank on the SMDR.
•
(SMDR Format #3 only) When a call is received from a H0(6B) / H1(24B,30B) ISDN line, the B
channel is not shown on the SMDR.
•
The maximum number of characters allowed in the SMDR for a Caller ID Caller Name is 12.
T1 Line
Description
The T-1 line provides up to 24 voice channels over a four-wire circuit. The 576 can support either 8,
16, or 24 channels. When the card is set for 16 channels, it occupies two flexible card slots. When the
card is set for 24 channels, it occupies three flexible card slots.
Unlike most other cards, the 576's T-1 cards must be installed in selected flexible card slots. Up to
three T-1 cards can be installed in a single cabinet, and a fully configured six-cabinet system can
support up to 18 T-1 cards.
3-56
DBS 576 (USA) issued April 2002
Section 700 - Operation
576-51-700
Advertisement
Table of Contents
