Panasonic EY7420 Service Manual page 11

Cordless drill & driver

Hide thumbs Also See for EY7420:

Procedure 1A → 2A → 2B → 2C → 2D → 2E → 2F Disassembly of gear box block.

Ref. No. 2F

Procedure 1A → 2A → 2B → 2C → 2D → 2E →

Ref. No. 2G

2F → 2G

1. The internal parts of gear box block can be disassembled in order.

ssembly of the Adjusting Screw.

1. Hold the gear box block with the small projection on top, and align

the largest projection of adjusting screw.

NOTE:

Make sure that the adjusting screw has its own correct direction for

proper assembly. Failure to do so, the clutch handle does not

rotate properly.

2. Turn the adjusting screw into the driving block until the end of spring

comes the same line as the largest projection of adjusting screw for

clockwise direction.

Table of Contents