Toshiba 19SL400U Owner's Manual page 6

VESA Mounting Pattern
VESA Mounting Pattern
VESA Mounting Pattern
Four screws Hook
Sturdy strap
(as short as posslb!e)
Two screws
CAUTION: Always place the TV on the floor or asturdy,
level, stable surface that can support the weight of the unit.
32" TV
26" TV
VESA Mounting Pattern
7)
VESA Mounting Pattern
22" TV
TV Size Hole Pattern(HxV) Screw Size
19"
I 00x 100
111111
M.:\.
,,"
I00x 100
111111
M.:\.
2()"
20()x 100
111111
M-l
~2" 20( h 200
nun
M6
(unit in nllll)
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel
2) Remove the four screws shown in the right
diagram. This will allow removal of the pedestal
stand
3) Once you have removed all four screws, holding
the pedestal stand in place, remove the pedestal
stand from the TV.
19" TV
Four screws
Hook
Sturdy strap
(as short as possible)
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy
strap from the hook(s) on the rear of the TV to a wall
stud, pillar, or other immovable structure. Make sure
the strap is tight, secure, and parallel to the floor.
6