2.7.6 Pay Tone Card (KX-TD50189)
Pay Tone Card
Connection to the ELCOT card (KX-TD50180)
1.
Insert the connector (plug) on the Pay Tone card into the connector (jack) on the ELCOT
card.
2.
Move the pin jack on the CN11s toward OP direction.
3.
Install the ELCOT card into a free slot. See Section 2.5.11 ELCOT Card (KX-TD50180).
Note
• Four CO lines are available for the Pay Tone function with one Pay Tone card.
Installation
connector
(4-pin)
connector
(8-pin)
connector
(22-pin)
Connected to
Connected to
ELCOT ports 5-8.
ELCOT ports 1-4.
Pay Tone Card
Pay Tone Card
ELCOT Card
• This card is installed on the ELCOT card.
OP
2.7 Other Cards
4-pin connector
plug
8-pin connector
plug
22-pin connector
plug
22-pin connector
jack
4-pin connector
jack
8-pin connector
jack
OP
CN11
161