Samsung 550 User Manual page 117

When selecting the Cable TV system:
4
Press the ENTER button to start the auto program.
Press the , , , to select the correct analog
signal cable system source among STD, HRC, and
IRC, then press the ENTER button. If you have
Digital cable TV, select the cable system signal
source for both Analog and Digital.
STD, HRC, and IRC identify various types of
cable TV systems. Contact your local cable
company to identify the type of cable system
that exists in your particular area. At this point
the signal source has been selected.
Auto Program
Select the cable system.
Analog STD HRC
Digital STD HRC
Move
The TV begins memorizing all available stations.
5
If you want to stop Auto Programming, press the
ENTER button.
The Stop Auto Program? message will be
displayed. Select Yes by pressing the
button, then press the ENTER button.
Auto Program
Stop Auto Program?
Yes
Move
The TV must be connected to an antenna/cable
in order to receive digital TV signals. Even if a
particular channel is deleted from the memory,
you can always tune to that channel directly by
using the number buttons on the remote control.
Viewing All Channels
Press the MENU button to display the menu.
1
Press the or button to select Channel, then
press the ENTER button.
Press the or button to select Channel List,
2
then press the ENTER button.
Press the button to select Added Channels.
Press the or button to select All Channels,
3
then press the ENTER button. Shows all currently
available channels. Press the
select a channel to view, then press the ENTER
button.
6-1 SBS
7 Air
7-1 KBS D-2
9 Air
9-1 KBS D-1
10 Air
10-1 EBS DTV
11-1 MBC DTV
19 Air
22 Air
Air Antenna Zoom Select
IRC
IRC
Enter Return
or
Air 10
3%
No
Enter Return
or button to
Option Next Program
TOOLS
English - 9
Picture Control
You can select the type of picture which best corresponds to your
viewing requirements.
Changing the Picture Standard
Press the MENU button to display the menu.
1
Press the ENTER button to select Picture.
Press the ENTER button to select Mode.
Press the or
Standard, or Movie, then press the ENTER button.
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Detailed Settings
Picture Mode
• Dynamic: Select the picture for high-definition in a
bright room.
• Standard: Select the picture for the optimum display
in the normal environment.
• Movie: Select the picture for viewing movies in a
dark room.
Customizing the Picture Settings
To select the desired picture mode, follow the
1
"Changing the Picture Standard" instructions number
1.
Press the or
2
Contrast, Brightness, Sharpness, Color, or Tint
(G/R), then press the ENTER button.
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Detailed Settings
Picture Options
button to select Dynamic,
:
Dynamic
Standard
: 7
Movie
: 80
: 45
: 50
: 50
: G50/R50
button to select Cell Light,
: Standard
: 7
: 95
: 45
: 50
: 50
: G50/R50
Continued...