CONNECTION
Connecting with SERIAL REMOTE terminals
The following describes examples of SERIAL REMOTE terminal connection.
To use the SERIAL REMOTE terminals, set REMOTE SEL SER of the REMOTE [1/2] Menu screen
to "ON" or "LOC+REM." (XPage 70)
Operate BR-HD50 with the wired remote controller
SERIAL
REMOTE
Start/stop recording with an external switch, e.g., a foot switch.
SERIAL
REMOTE
Foot
switch
E-30
Connect the wired remote controller to the
SERIAL REMOTE terminal.
Wired remote
controller
Connect an external switch, e.g., a foot switch,
to the SERIAL REMOTE terminal.
The format of the input signals can be selected
with FOOT SW in the REMOTE [2/2] Menu
screen. (XPage 71)