Private Network Features-Qsig-Cf (Call Forwarding) - Panasonic KX-TDA50G Feature Manual

13.1.20 Private Network Features—QSIG—CF (Call Forwarding)
PC Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary
Service— COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
3.35 [1-3] Option—
KX-TDA200/KX-TDA600 only)
13.1.20 Private Network Features—QSIG—CF (Call Forwarding)
Description
The PBX forwards the call to a destination extension in another PBX in the QSIG network. The destination can
be set on your own PBX on an extension basis as the forward destination of CO line calls (® 6.1.6 FWD (Call
Forwarding)).
If the same trunk group is used for the incoming call and the forwarded call, the following situation will be
possible.
[Example]
PBX-1
Extn. 1000 Extn. 1001
Dials "2000".
PBX-1
3
Extn. 1000 Extn. 1001
Conditions
•
This feature can be enabled or disabled on each ISDN (QSIG) port of the PBX.
256 Feature Manual
New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/
QSIG
PBX-2
1
Call to 2000
2 Forwarded
to 1001
Extn. 2000
(Forward Destination
of CO Line Calls: 1001)
QSIG
Extn. 2000
Extension 1000 of PBX-1 dials extension
1
number "2000", and the call is sent to
extension "2000" of PBX-2 through QSIG
network.
The call is forwarded to the forward
2
destination of CO line calls of extension
2000, which is extension "1001" of
PBX-1.
The call between PBX-1 and PBX-2 is
3
released, and the call is connected
directly to the forward destination of
extension 2000.
PBX-2
Document Version 2008-11