HP 800 User Manual page 244

End-user Access
Customizing Error Messages
Test name
checkMicrosoftOfficeMacroSecurityLevel.String.5
checkMicrosoftOfficeMacroSecurityLevel.String.6
checkNetBiosInfo.String.1
checkPersonalFirewalls.String.1
checkPersonalFirewalls.String.2
checkPersonalFirewalls.String.3
checkServicePacks.String.1
checkServicePacks.String.2
checkServicePacks.String.3
checkServicePacks.String.4
checkServicePacks.String.5
checkServicePacks.String.6
checkServicesNotAllowed.String.1
checkServicesNotAllowed.String.2
checkServicesNotAllowed.String.3
checkServicesRequired.String.1
Table 5-1. Default Test Names and Descriptions (cont.)
5-50
Description
Microsoft Office %s is not installed.,
The Microsoft %s macro security level setting must be set to
%s or above. To change the security level, open %s and do
the following: Select \'Options...\' under the \'Tools\' menu.
Choose the \'Security\' tab. Press the \'Macro Security...\'
button. Select the \'Security Level\' tab. Finally, select the
security level %s or higher.,
An unsupported operating system was encountered.,
The required personal firewall software was not found.
Install a personal firewall and keep it up-to-date. Supported
firewall software: %s,
%s is installed but not running.,
%s service is installed and running.,
An unsupported operating system was encountered.,
The OS is not relevant to this test.,
There are no service packs installed. Run Windows Update
to install the most recent service packs.,
There are no service packs installed. Run Windows Update
to install the most recent service packs.,
All required service packs are installed,
The service packs installed are not current. Run Windows
Update to install the most recent service packs. The current
installed service pack is %s. You must be running service
pack %s or later.,
All services found are allowed.,
The following services are not allowed: %s. Stop the service
by selecting Control Panel>>Administrative Tools (located in
the Performance and Maintenance category
folder)>>Services application>>right-click on the service
and select properties. Change the startup type to manual and
click stop. Click OK to save your changes.,
%s, # placeholder for link location for each service.
All required services were found.,