Transmitter Section - Kenwood NXR-710 Service Manual

Transmitter Section

Item Condition
1. High Trans- FPU Test mode
mit Power 1) Adjust Item: [High Transmit
Limit Adjust Power Limit Adjust]
Frequency: [Low], [Low'],
[Center], [High'], [High]
Press [Transmit] button.
2. High Trans- FPU Test mode
mit Power 1) Adjust Item: [High Transmit
Adjust Power ]
Frequency: [Low], [Low'],
[Center], [High'], [High]
Press [Transmit] button.
3. Low Trans- FPU Test mode
mit Power 1) Adjust Item: [Low Transmit
Limit Adjust Power Limit Adjust ]
Frequency: [Low], [Low'],
[Center], [High'], [High]
Press [Transmit] button.
4. Low Trans- FPU Test mode
mit Power 1) Adjust Item: [High Transmit
Adjust Power Adjust ]
Frequency: [Low], [Low'],
[Center], [High'], [High]
Press [Transmit] button.
5. Maximum FPU Test mode
Deviation 1) Adjust Item: [Maximum De-
Adjust viation (NXDN Narrow)]
[NXDN Nar-
row]
6. Maximum FPU Test mode
Deviation 1) Adjust Item: [Maximum De-
Adjust viation (NXDN Very Narrow)]
[NXDN Very
Narrow]
7. Maximum FPU Test mode
Deviation 1) Adjust Item: [Maximum De-
Adjust viation (Analog Wide)]
[Analog
Wide]
8. Maximum FPU Test mode
Deviation 1) Adjust Item: [Maximum De-
Adjust viation (Analog Narrow)]
[Analog Nar-
row]
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
Power meter Rear TX ANT
NXR-710
Adjustment
Parts Method
PC 53W±1.5W Press [Apply] button to store
ADJ the adjustment value.
50W±0.5W
28W±1.5W
25W±0.5W
PC Write the value as Press [Apply] button to store
ADJ followings (typical the adjustment value.
value)
[Maximum Deviation
(NXDN Narrow)] =
530
Write the value as
followings (typical
value)
[Maximum Deviation
(NXDN Very Nar-
row)] = 530
Write the value as
followings (typical
value)
[Maximum Deviation
(Analog Wide)] =
530
Write the value as
followings (typical
value)
[Maximum Deviation
(Analog Narrow)] =
530
Specifi cations / Remarks
47