Canon MX860 series Manual page 236

Using the Face Sharpener Function
The face is sharpened and the
image.
Note
Effect levels can be changed using the slider below Face Sharpener.
Click (Compare) to display the images before and after the correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction operation.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Manual Correction
3.
Click Manual, then click Correct/Enhance.
4.
Click Face Sharpener.
Move the cursor over the image. The shape of the cursor changes to
5.
Drag to select the area you want to correct, then click OK that appears over the
image.
The facial area in and around the selected area is sharpened and the
Enhancement) mark appears on the upper left of the image.
Note
You can also drag to rotate the selected area.
Effect levels can be changed using the slider below Face Sharpener.
Click Undo to undo the preceding correction operation.
6.
Click Save Selected Image or Save All Corrected Images.
You can save corrected images as new files.
(Correction/Enhancement) mark appears on the upper left of the
Pagina 236 din 1009 pagini
(Cross).
(Correction/