Programming The V-Sipgw16 Card-Card Property; Accessing Card Properties; Card Property - Panasonic KX-TDE600 Programming Manual

3.2 Programming the V-SIPGW16 Card—Card
Property

3.2.1 Card Property

The properties of the V-SIPGW card can be specified. To program the parameters, click Common Settings,
and set the desired value.

Accessing Card Properties

1.
Under Configuration, click Slot.
2.
Move the mouse pointer over the white PBX image at the bottom of the screen for the virtual slots.
3.
Click Select Shelf.
4.
Move the mouse pointer over the V-SIPGW16 card.
5.
Click Card Property.
Programming Card Property
Icon Description
In this section, the following icons show the different parameter type.
Icon Description for Parameter Type
Manual programming is compulsory under certain conditions.
Not marked Manual programming is optional.
DNS Server IP Address Method
Specifies the method of IP address assignment for a DNS server. When selecting DHCP, the DNS server IP
address can be assigned automatically by a DHCP server. When selecting Manual, the DNS server IP address
must be assigned manually.
Default
Manual
Value Range
DHCP, Manual
DHCP Preferred DNS Server IP Address
Indicates the IP address of the preferred DNS server assigned automatically by the DHCP server (reference
only).
Default
Not stored.
Value Range
1.0.0.0–223.255.255.255
Document Version 2008-11 Programming Manual for Virtual SIP CO Line Card
3.2.1 Card Property
45