Uninstalling Ca Call Accounting Web Server - Panasonic KX-NCP Series Software Manual

The web server main screen is displayed.
Note
•
The CA Call Accounting web server runs as a Windows service. After you configure the web server
settings, you do not need to start the CA Call Accounting application or log in to Windows to start the
web server.
•
The SMDR type assigned in PBXs has to be "Type A".
In addition, the SMDR date format assigned in PBXs and the CA Call Accounting server has to be
same.
This setting can be programmed via the web server: Go to Options ® SMDR ® SMDR Format.
•
You must programme the charge rates and currency before connecting a PBX. This is because the
call charge is calculated when call information is sent from the PBX.
These settings can be programmed via the web client: Go to Options ® Call Charge Settings, and
Options ® Other Settings ® Currency and Decimal Places Setting.
•
To use a language other than those available during installation, please contact your dealer for service
options.

4.2 Uninstalling CA Call Accounting Web Server

1.
To uninstall the CA Call Accounting web server, perform one of the following procedures.
• On the Start menu, point to All Programs ® Panasonic ® CA Call Account, and select Uninstall.
•
From the Control Panel, double-click Add or Remove Programs, select CA Call Accounting, and
then click Remove.
4.2 Uninstalling CA Call Accounting Web Server
Quick Reference Guide 11