LG KD-36D Quick Reference Manual

●
DIGITAL KEY TELEPHONE / Quick Reference Guide DIGITAL KEY TELEPHONE / Quick Reference Guide
Quick Reference Guide for Digital Key Telephone
Fixed Feature Buttons
FLASH button is used to terminate an outside call
●
and re-seize dial tone without having to hang up
the handset.
SPEED button provides you with access to speed
●
dialing, save number redial and last number redial.
TRANS (TRANSFER) button is used to transfer an
●
outside call from a station to another.
CALLBK (CALLBACK) button allows you to leave
●
a callback indication at a station that is busy,
unattended, or in Do Not Disturb.
CONF button is used to establish conference calls.
●
DND/FWD (Do Not Disturb/FORWARD) button
●
allows you to forward your calls to another
destination, or make DND mode.
Call Forward
Press MON/SPEAKER button. Press MON/SPEAKER button
● ●
Press DND/FWD button and dial the desired Call
●
Forward type.
- 0 : Follow me (not available in GDK-16/20W)
- 1 : Unconditional
- 2 : Busy calls
- 3 : No answer calls
- 4 : Busy/no answer calls
- 5 : Station off-net
- 6 : Incoming outside line to off-net (Sys. ATD only)
- 7 : No Answer DVU forward-1(after 4sec)
- 8 : No Answer DVU forward-2(after predefined time)
- 9 : Busy DVU forward y
- # : Cancel previous call forward
Dial the station number or press DSS button or
●
intercom group where calls are forwarded.
(Confirmation tone is heard.)
Call Wait (Camp-on)
If you dial a busy station, you may alert it to your call.
After receiving intercom busy tone, dial * or the last
●
digit of called station number or press DSS button.
When the called party answers, consult with them
●
or hang up to transfer the call, if any.
Conference
Call the desired party (internal or outside). When
●
called party answers, press CONF button.
Add next conference party by selecting another
●
outside line or intercom station.
When the party answers, press CONF button twice.
●
All parties are connected.
To terminate a conference,
The conference initiator should be actively in the
conference.
Hang up, or press CONF button to finish the
●
conference (only for conference initiator).
MUTE button allows you to switch the built in
●
microphone on or off when using the speakerphone
or the handset microphone when using the handset.
MON/SPEAKER button enables you to make a phone
●
call without lifting handset. It turns the telephone on
and off when using the speakerphone.
HOLD button enables you to place an outside caller
●
on hold.
REDIAL allows you to make last number redial and
●
auto call number redial.
▼ ▲
VOLUME bar allows you to adjust speakerphone
●
and handset volume.
Leaving a Message Waiting Indication
If you dial a station that is unattended or in Do If you dial a station that is unattended or in Do
Not Disturb, you can leave a message waiting
indication.
Dial the desired intercom station. Busy tone or
●
DND tone is heard.
Press CALLBK button. The called party's CALLBK
●
button LED will flash.
To answer a Message Waiting Indication,
Press flashing CALLBK button and the station that
●
left message will be signaled with tone ringing.
If called station does not answer, press the CALLBK
●
button once to leave a message.
Placing an Outside Call on Hold
While connected to an outside line,
Press HOLD/SAVE button.
●
- Once for system hold
- Twice for exclusive hold
Reverse if hold preference is programmed to
●
system hold.
Press HOLD/SAVE button. (in GDK-16/20W)
●
CO line call will be put on hold according to the
Hold Preference.
Last Number Redial
The last dialed number on an outside line is saved.
Press REDIAL button. Or,
●
Press SPEED button and dial *.
●
Save Number Redial
(＊)
If you wish to save a number you dialed,
After dialing the number of an outside party, keep
●
the handset off-hook.
Press SPEED button twice.
●
To dial a saved number,
Press SPEED button and dial #.
●
Note : The feature which is marked
(＊), is not available in GDK-16/20W.
KD, KD/E, LKD Series KD, KD/E, LKD Series
g