Panasonic KX-NCP500 Getting Started page 42

4.3.1 Assigning the IP Addressing Information
KX-NT321
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address*
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address (if required)
Select "Default GW".
To enter the IP address of the Secondary PBX (if required)
Press HOLD to return
to the Menu screen.
Press SP-PHONE.
To end programming
Press HOLD twice to return
to the Menu screen.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
42 Getting Started
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE.
1
Press SP-PHONE.
Press SP-PHONE.
Default Gateway Address*
Press SP-PHONE.
Select "PBX". Press SP-PHONE.
PBX IP Address
Press STORE.
Select "DHCP (Disable)". Press SP-PHONE
twice.
Subnet Mask Address*
Select "PBX IP Press SP-PHONE.
Address".
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
2
Press SP-PHONE.
3
Press SP-PHONE.
Select "Secondary
PBX".