Troubleshooting - Kenwood SC7000 Instruction Manual

Floor sweeper/steam mop
Table of Contents

Advertisement

TROUBLESHOOTING

The cleaner is not picking up dirt or the suction action is not efficient:
CAUSE
Dust container full.
Dirty filter.
Dust container incorrectly secured in its seat. Make sure that the dust container is completely
No steam is coming from the nozzles:
CAUSE
No water in the tank.
The boiler tank has not been correctly inser-
ted into its seat.
The boiler tank is not switched on.
Water leaks from the steam nozzles:
CAUSE
The optimum temperature has not been rea-
ched.
Sudden increase in the noise of the steam pump:
CAUSE
No water in the tank.
The boiler tank has not been correctly inser-
ted into its seat.
SOLUTION
Empty the container.
Clean the filter.
inserted and secured in its seat.
SOLUTION
Fill the tank.
Take out the boiler tank and put it in again, making
sure it is in the correct position.
Press the key to switch on the boiler tank.
SOLUTION
Wait for the steam ready light to switch on.
SOLUTION
Switch off the appliance and fill the water tank.
Take out the boiler tank and put it in again, making
sure it is in the correct position.
- 7 -
EN

Advertisement

Table of Contents
loading

Table of Contents