Panasonic KX-NCP500 Programming Manual page 387

PT Display—PT Last Display Duration in Idle Mode
Specifies the length of time that the current information remains on the display after the extension returns to
idle status.
Default
5 s
Value Range
1–15 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Air Synchronization—Watching Degeneracy
Specifies the length of time that a Slave CS can maintain an ongoing call after air synchronization is lost.
Default
300
Value Range
60 ´ n (n=0–300) s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
13.6 [11-5] Air Synchronization
Feature Manual References
None
Voice Mail (Caller from VM to CO)—On-hook Wait Time
Specifies the length of time from when the VPS seizes a CO line (for example, to transfer a call) until the VPS
goes on hook. If the time specified here is too short, the VPS will be unable to dial the number and make a
connection.
Default
10 s
Document Version 2011-10
4.5 [2-3] Timers & Counters
PC Programming Manual 387