Mitsubishi Electric Got 1000 Training Manual page 45

(From previous page)
(3) Setting of Screen Switch Device
The device for switching the screens displayed on GOT is set.
(The settings made here can be changed later.)
Refer to section 4.2.3 for details on screen switching device settings.
For details on screen switch device settings, refer to ~.
(Next page)
10) The left screen is displayed.
Confirm the settings.
Click the Next button.
10)
1) When the left screen appears, the screen
switching device is set as follows.
Base screen: D0
Overlap window 1: D1
Overlap window 2: - (no setting)
Superimpose window 1: - (no setting)
1) Superimpose window 2: - (no setting)
Click the Next button.
2) The left screen is displayed.
Confirm the settings.
Click the Finish button.
2)
4 - 5