Page 1
COMPACT COMPONENT SYSTEM POWERED SUBWOOFER SP-DWF10 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
Page 2
Thank you for purchasing a JVC speaker. Before you begin using it, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer. Warnings, Cautions and Others CAUTION...
Page 3
Connections Before connecting this unit to the amplifier (or receiver), observe the following carefully. • Turn off the amplifier. • Make all connections before plugging in this unit. Amplifier or Receiver To SUBWOOFER OUT To LINE OUT or MONO Stereo audio cord (not Supplied) In the case that the receiver dose not have the SUBWOOFER OUT or MONO terminal.
– Turn down the volume of the playback source, turn off and on the source, then adjust the volume properly on the source. Specifications Type : Powered Subwoofer Bass-reflex type (magnetically shielded type) Speaker : 16.0 cm cone × 1 (6-5/16") Frequency Range : 32 Hz Impedance : 4 Ω Input terminals : INPUT (LOW-LEVEL) Power requirements : AC 120 V Output power of built-in amp : 100 W (45 Hz, 4 Ω, 10 % THD)
Page 5
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number.
Page 8
Thank you for purchasing a JVC speaker. Before you begin using it, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer. Warnings, Cautions and Others To reduce the risk of electrical shocks, fire, etc.: 1.
Page 9
When the volume level of the amplifier is so low or the incoming signals are so weak that this unit cannot detect sounds, Auto Power On/Standby may not work correctly. – 3 – SP-DWF10 (Front) SP-DWF10 (Rear) Rear view Power lamp Signals—AUTO POWER ON/STANDBY...
Page 10
—Place all the main speakers at the same distance from the listening position. < Only for SP-DWF10 > — Be sure to place the powered subwoofer to the TV's right. If you place the powered subwoofer to the TV's left, keep sufficient distance between them to prevent the TV from appearing mottled.
Page 11
POWERED SUBWOOFER COMPACT COMPONENT SYSTEM SUBWOOFER MOTRIZ SUBWOOFER AUTO-ALIMENTADO SP-DWF10 INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUAL DE INSTRUÇÕES LVT1145-004A [US/UJ]...
Page 12
Vista delantera 20 cm 15 cm Gracias por la compra de un altavoz JVC. Para obtener el mejor rendimiento posible, por favor lea atentamente las instrucciones antes de intentar el uso. Si tienenaluna pregunta, acuda a su agente de JVC.
Page 13
• Speaker vibrations may cause howling. Place the unit as far away from the player as possible. • Take the occurrence of earthquakes or other physical shocks into consideration when selecting the installation place, and secure the unit thoroughly.
Page 14
En el caso de que el receptor no tenga el terminal SUBWOOFER OUT o MONO. Additional Information Speaker layout / Disposición de los altavoces To obtain the best possible sound from your unit: —Place a subwoofer wherever you like since bass sound is non-directional.
Page 15
ENGLISH Operations Front / Parte delantera Turning On the Power—POWER To turn on the power. Press the POWER switch to the [ ❙ ] ON position. • The power lamp lights in green. To cut of the power. Press the POWER switch to the [ ‡ ] OFF position. •...
Page 16
Specifications Type : Powered Subwoofer Bass-reflex type (magnetically shielded type) Speaker : 16,0 cm cone (× 1) Frequency Range : 32 Hz Impedance : 4 Ω Input terminals : INPUT (LOW-LEVEL) Power requirements : AC 110-240 V Output power of built-in amp : 100 W (50 Hz, 4 Ω, 10 % THD)
Page 18
Thank you for purchasing a JVC speaker. Before you begin using it, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer. Warnings, Cautions and Others To reduce the risk of electrical shocks, fire, etc.: 1.
Page 19
Connections Before connecting this unit to the amplifier (or receiver), observe the following carefully. • Turn off the amplifier. • Make all connections before plugging in this unit. Amplifier or Receiver To SUBWOOFER OUT To LINE OUT or MONO Stereo audio cord (not Supplied) In the case that the receiver dose not have the SUBWOOFER OUT or MONO terminal.
Page 20
– Turn down the volume of the playback source, turn off and on the source, then adjust the volume properly on the source. Specifications Type : Powered Subwoofer Bass-reflex type (magnetically shielded type) Speaker : 16.0 cm cone (× 1) Frequency Range : 32 Hz Impedance : 4 Ω Input terminals : INPUT (LOW-LEVEL) Power requirements : AC 110-240 V Output power of built-in amp : 100 W (50 Hz, 4 Ω, 10 % THD)