Toshiba e-studio2040c Quick Start Manual page 67

Other options available are as follows. Contact your service technician or representative for details.
Work Table (KK-4550)
This is a small table for placing originals while the equipment is
being operated.
Installed on the right-hand side of the equipment.
FAX Unit (GD-150)
This is a unit for using the equipment as a Fax machine.
Installed inside of the equipment.
nd Line for FAX Unit (GD-10)
This unit enables you to add a line to the Fax, making a 2nd line
available.
• Installed inside of the equipment.
• The FAX Unit (optional, GD-1250) is required.
Desk (MH-1700, MH-1710)
This is a desk for the equipment.
Operator's Manual Pocket (KK-10)
Keep the manual in this pocket.
Wireless LAN Module (GN-100)
This module enables the equipment to be used in a wireless LAN
environment.
• Installed inside of the equipment.
• The Antenna (optional, GN-3010) is required.
• The equipment cannot be connected to the wireless and wired
LAN at the same time.
Bluetooth Module (GN-010)
This module enables you to perform Bluetooth printing.
• Installed inside of the equipment.
• The Antenna (optional, GN-3010) is required.
Antenna (GN-010)
This is used when the Wireless LAN Module or Bluetooth Module
is installed.
e-BRIDGE ID Gate (KP-004, KP-005)
You can log in and use the equipment simply by holding the IC
card over the e-BRIDGE ID Gate.
• Installed on the right-hand side of the equipment.
• This cannot be installed with the Work Table at the same time.
Data Overwrite Enabler (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, Fax, Internet Fax or network Fax is
performed. It overwrites temporarily stored data with random
data.
IPsec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Meta Scan Enabler (GS-1010)
This enables the Meta Scan function in this equipment.
External Interface Enabler (GS-100)
This enables the EWB function in this equipment.
Options
5
5