4.2
System Programming
Description
Selection
Default
Programming
Condition
Feature Reference
Cyclic Tone Detection
Selects the number of times that the system detects the cyclic tone.
The system regards a call as completed after detecting the cyclic
tone the programmed number of times.
Disable (will not detect) / 2 Times / 3 Times / 4 Times
4 Times
1.
Enter 513.
Display: Tone Detection
2.
Press NEXT.
Display example: 4 Times
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press END.
• An optional OGM/FAX Detection card is necessary.
Section 3, Features
Direct Inward System Access (DISA)
System Programming
513
4-95