Timer Class Timer Assignment - NEC SL1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Program
Use Program 20-31 : Timer Class Timer Assignment to assign values to the timers on a class of
service basis.
20
Input Data
Item No.
01 Trunk Queuing Callback Duration
Time
Trunk Queuing Callback rings an ex-
tension for this amount of time
02 Callback / Trunk Queuing Cancel
Time
The system cancels an extension
Callback or Trunk Queuing request
after this amount of time.
03 Virtual Extension Delay Interval
Virtual Extensions set for Delayed
Ringing (refer to
sion Delayed Ring Assignment) on
page 2-142
this time.
04 Intercom Interdigits Time (Intercom
I/D Timer)
When placing Intercom calls, exten-
sion users must dial each digit in this
time.
05 Trunk Interdigits Time (Trunk I/D
Timer)
The system waits for this time to ex-
pire before placing the call in a talk
state (Call Timer starts after time ex-
pires, Voice Over and Barge-In are
not allowed until after time expires).
06 Hotline Time Start Time (Hotline
Start)
A Ringdown extension automatically
calls the programmed destination
after this time.
07 Ring No Answer Alarm Time
If a trunk rings a multiline telephone
longer than this time, the system
changes the ring cadence. This indi-
cates to the user that the call has
been ringing too long.
08 DIL/Incoming Ring Group No An-
swer Time
A DIL that rings its programmed desti-
nation longer than this time diverts to
the DIL No Answer Ring Group (set in
Program 22-08).
2-198
Program 20 : System Option Setup

20-31 : Timer Class Timer Assignment

Timer Class Number
Item
15-11 : Virtual Exten-
ring the extension after
Input Data
0 ~ 64800 seconds 15 seconds
0 ~ 64800 seconds 64800 seconds
0 ~ 64800 seconds 10 seconds
0 ~ 64800 seconds 10 seconds
0 ~ 64800 seconds 10 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds 60 seconds
0 ~ 64800 seconds
Program 20 : System Option Setup
ISSUE 1.0
0 ~ 15
Default Related Program
20-01-08
20-01-09
20-04-03
21-01-02
21-01-03
5 seconds 21-01-09
22-01-03
0 second 22-01-04