Using The Timer - Sony TRINITRON KD-34XBR2 Service Manual

Using the Timer

Setting the Timer
z
You can also access the
Timer through the Setup menu.
For details, see page 60.
You can use the Timer to program the DTV to turn on and off and
tune to a specific channel at two scheduled viewing times.
The first time you turned on the DTV, a setup screen prompted you to
set the clock (see "Setting Up the DTV Automatically" on page 31). If
you didn't set the clock during this initial setup, you need to set it
before you can use the Timer (see page 46).
1
Press .
TIMER
The Set Clock/Timers screen appears, with the current timer
settings shown.
2
To set the Timer, move the joystick V or v to highlight
, then press
Timer 2
✍
The clock must be set before you can set either of the Timers. If the clock
is not set, Timer 1 and Timer 2 cannot be selected. To set the clock, see
"Setting the Clock" on pag e46.
3
Move the joystick V or v to highlight one of the following
options , then press
Set
Select to set or change the timer settings for the selected
Timer ( Timer 1 or Timer 2 ).
On
Select to turn on the timer settings for the selected Timer
( Timer 1 or Timer 2 ).
Off
Select to turn off the timer settings for the selected Timer
( Timer 1 or Timer 2 ).
4
If you selected Set
( appears.
Timer 1 or Timer 2)
.
.
in step 3, the setup screen for the selected Timer
Using the DTV Features
or
Timer 1
45