Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Admin Password:
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
User Password:
Enter the new password for the User login. If you login as the
User, you cannot change the settings (you can only view them).
Gateway name:
Enter a name for your router.
Enable Graphical
Enables a challenge-response test to require users to type letters
Authentication:
or numbers from a distorted image displayed on the screen to
prevent online hackers and unauthorized users from gaining
access to your router's network settings.
Enable HTTPS
Server:
Check to enable HTTPS to connect to the router securely.
This means to connect to the router, you must enter
https://192.168.0.1 (for example) instead of http://192.168.0.1.
Enable Remote
Remote management allows the DIR-816L to be configured
Management:
from the Internet by a web browser. A username/password is
still required to access the Web Management interface.
D-Link DIR-816L User Manual
Tools
Admin
138