Basic Menu Operations; Receiver Menu; Group/Channel Selection (Gp/Ch); Active Channel Scanning Function (Active Ch Scan) - Sony DWR-R01D Operating Instructions Manual

UTILITY menu
RF BAND
ANT ATT a
ANT ATT b
ANT DC OUT
AUDIO SYNC SOURCE
DELAY ADJUST
NETWORK RECEIVER NAME
IP ADDRESS
SUBNET MASK
DISPLAY BRIGHTNESS
DIMMER MODE
FACTORY PRESET
VERSION

Basic Menu Operations

In the procedure below, the controls for the receiver
channel 1 are used for illustration purposes.
Function name
1
Press one of the menu buttons (RECEIVER,
TRANSMITTER, RF REMOTE, or UTILITY button)
to select the menu.
2
Rotate the jog dial to select the item to be set, and then
press the dial.
For details on items contained in each menu, see
"Menu hierarchy" on page 25.
3
Rotate the jog dial to change the setting.
4
Press the jog dial to enter the setting.
26

RECEIVER Menu

Item to be set
RECEIVER Menu
For details on menu operation, see "Basic Menu
Operations" on page 26.
Use this menu to set the digital wireless receiver functions
(the main functions of this receiver).
The following shows the US model display.
Function name
In this section, the functions included in the menu and their
parameters are explained.
Underlined items are the factory settings.
Group/channel Selection
Set the group and channel to receive. The factory settings
are the following:
US models
DWR-R01D/30: 00 3001 566.125 MHz
DWR-R01D/42: 00 4201 638.125 MHz
European model
DWR-R01D/62: 00 6201 798.125 MHz
For details, see"Selecting the Group/Channel" on
page 23.
Active Channel Scanning Function
(ACTIVE CH SCAN)
The active channel scan function operates.
For details, see "Using the Active Channel Scan
Function" on page 23.
Clear Channel Scan Function
CH SCAN)
The clear channel scan function operates.
Items to be set
(GP/CH)
(CLEAR