Taking Out Discs - Epson PP-100AP User Manual

Taking Out Discs

Follow the steps below to take out the published discs from the stackers.
1. Open the disc cover (only for output to Stacker 2 or 3), and take out the stacker.
2. Take out the published discs from the stacker. The output stacker differs according to
the publishing mode. Refer to the following table.
Output stacker
Stacker 2
Stacker 3
Stacker 4
Stacker 2
Note:
❏ Be sure to let CDs and DVDs dry completely before using them or touching the printed surface.
Allow Epson specified discs to dry for at least 1 hour and other types of discs for at least 24
hours.
❏ If the print position is misaligned, adjust it using the printer driver. For details, refer to the printer
driver Help.
❏ If the ink smears, adjust the color saturation. For details, refer to the printer driver Help.
❏ When publishing discs using Batch Mode, the number of discs output to Stacker 3 is not always
the same with the number of discs set to Stacker 2. Also, the number of discs does not always
become 50. The same applies to the number of discs output to Stacker 2. For Batch mode, the
output stacker switches to Stacker 2 when the ejected discs accumulated in Stacker 3 reach the
height limit. As a result, the number of discs output to the stacker depends on the thickness of
the discs used.
Mode
Standard mode
Batch mode
Batch mode
Standard mode
External Output mode
Stacker 3
Number of discs
Up to about 50 discs
Up to about 50 discs
Up to about 5 discs
Stacker 4
Publishing Discs
54