Selecting Settings For Emailing Whiteboard Pages - Epson BrightLink Pro 1420Wi User Manual

• User name lets you set the a user name with read/write privileges on the network folder. You can
enter up to 64 alphanumeric characters. You can enter a domain name by adding it before the
user name and separating them with a backslash (domain\username).
• Password lets you enter a password for the user name. You can enter up to 64 alphanumeric
characters. After you enter the password and select Setup complete, the password is hidden.
• Check Connection lets you test the network connection.
Note: Use the displayed keyboard to enter the address, user name, and password if necessary.
Press the arrow buttons on the remote control to highlight numbers and press Enter to select them.
6. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to
save your settings and exit the menus.
Parent topic:

Selecting Settings for Emailing Whiteboard Pages

You can select the settings for emailing whiteboard pages from the projector.
1. Press the Menu button on the remote control.
2. Select the Extended menu and press Enter.
3. Select Whiteboard Settings and press Enter.
Selecting Whiteboard Settings
203