1. WirelessIP-5000 Web Interface 1.1 Abstract It is possible to use your web browser to configure the settings for the WirelessIP-5000. By using the Web Interface, you can configure detailed settings that cannot be set via the terminal itself. 1.2 Starting Up To start up the WWW Management Interface, start the web browser on the client terminal and access this address: http://<host>:<port>/For <host>, insert the IP address or host name for the terminal that you want to...
(Figure 9) 2.3.1 Load & Upgrade Your WirelessIP-5000’s firmware can be upgraded here. First you need to setup a TFTP server and copy the new files to the root directory. The files you need are: loadrun.ini; ipphone.bz; g729a.bz and user.ini.