1) Removal of the pick-up roller/paper feed roller
1
4
2
2
7
5
1
4
3
2
SV103
2) Removal of the DFP roller
3
4
3
3-16
(1)Remove the right cover (2 screws)
(2)Remove the screws and covers. (x 2)
(3)Disconnect the harness.
(4)Remove the bypass tray.
3
2
(1)Remove the touch ring.
(2)Remove the paper stopper.
(3)Remove the sensor lever.
(4)Remove the touch ring.
(5)Remove the pick-up roller
(6)Remove the touch ring.
(7)Remove the paper feed roller.
(1)Perform procedure 1. (above)
(2)Open the copier paper feed door.
(3)Press the DFP roller down then remove
touch ring.
(4)Remove the DFP roller.