Technical Information - JVC 0509GLT-NF-MT Instructions Manual

Technical information

Language group for Teletext
Group
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian,
German, French, Italian, Swedish, Finnish
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian,
Slovenian, Czech, Slovak, English, German
Group-4 Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
Group-5 English, French, Turkish, Farsi
Group-6 Lettish, Lithuanian, Estonian, Ukrainian, Czech, Slovak, English, German
• If the characters are unreadable. ➡ Select different Teletext language
group. (P. 6)
Sound and Colour system in your country or region
Area Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore, Thailand, India, etc.
China, Vietnam, etc.
Asia, Middle East
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Europe
Germany, Holland, Belgium, etc.
UK, etc.
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
Africa Nigeria, etc.
Egypt, Morocco, etc.
16
Languages
System System
B/G
PAL
D/K
I
B/G SECAM
M NTSC
SECAM
D/K
B/G PAL
I
B/G PAL
I
PAL
B/G
SECAM
PC Signals that can be displayed
• If the signal doesn't appear, check that the vertical frequency on the
PC is set to "60Hz".
Resolution
Vertical frequency (Hz)
What is "Clear SD"
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear
SD mode resolves disadvantage for better picture quality.
No use "Clear SD"
Connect "DVI" devices
Connect a "DVI" device to "HDMI" using "DVI-HDMI" conversion cable. Connect
analogue sound output of the DVI device to L and R terminals in HDMI-1.
• Set "Audio" in "HDMI Setting" to "Analogue" or "Auto" (P. 12)
• HDMI-2 and HDMI-3 input does not support analogue sound.
640 x 480(VGA) / 1024 x 768(XGA)
60.0
Use "Clear SD"