Slt Adapter - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II
Description
The SLT (Single Line Telephone) Adapter allows a port of an ESIB(8)-U( ) ETU or ESIE(8)-U( ) ETU to
support a single line telephone. A single line telephone can be connected to the ESIB(8)-U( ) ETU using
the SLT Adapter and 2-wire cable. Eight SLTII(1)-U( ) ADP Single Line Telephone Adapters can be
installed in the Electra Elite IPK II system.
Conditions
A maximum of eight SLTII(1)-U( ) ADPs can be used in the Electra Elite IPK II system.

Dial Pulse and Dual-Tone Multifrequency Single Line Telephones are supported.

The SLTII(1)-U( ) ADP does not support voice mail.

Message Waiting LED is not supported.

A single line telephone connected to an SLTII(1)-U( ) ADP cannot perform a Trunk-to-Trunk

Transfer or support a 1-terminal to 2-outside party conference call.
Default Setting
None
System Availability
Terminals
Single Line Telephones
Required Component(s)
SLTII(1)-U( ) ADP
Related Features
Ancillary Device Connection

SLT Adapter

Document Revision 4C
SLT Adapter
2 - 889