Receiver Back Panel Image - Motorola Fibe TV Reference Manual

Receiver back panel image

Important note:
Do not interchange the power adapters for your Fibe HD PVR
with any other Fibe HD receivers. Since they have different electrical power
requirements, interchanging them poses a safety hazard.
key Item
1 To Wall (VIDEo IN)
2 HDMI
3 NETWoRk
4 Y Pb Pr
5 S-VIDEo
6 oPTICal
7 VIDEo ouT
8 auDIo ouT R and l
To TV
9
(VIDEo ouT)
10 uSB
11 PoWER +12V DC
1 2 3
Description
Coaxial input for digital signal from the Fibe modem to the Fibe HD PVR or HD receiver.
Provides the best quality digital video signal to a HDTV and also provides up to 5.1
digital audio to capable devices through one cable.
Ethernet 10/100Base-T RJ-45 port for IP video output.
Component video output provides HD signals up to 720p or 1080i for a HDTV
(for audio you must connect either optical output audio out R and l).
Provides high quality standard definition video output (for audio you must connect
either optical output audio out R and l).
Provides the best digital audio output for up to 5.1 surround to a home theatre
receiver (also known as a Toslink or S/PDIF connection).
Provides a very good standard-definition RCa video output to a TV, VCR, or other
device (for audio you must connect either optical output audio out R and l).
Provides stereo audio output.
Coaxial standard definition output to connect video and audio to the TV or VCR.
uSB 2.0 connector.
Connector for the DC power adapter.
4 5 6 7 8 9 10 11
19