Basic Operations For Function Setup - Panasonic DP-C406 Operating Instructions Manual

Basic Operations for Function Setup

The following procedure is an example of setting up function(s). To select a function, refer to the list of
Function Parameters described later.
1
Press the Function key.
2
Select the desired setting.
3
Select the desired tab.
4
Select an item.
If a single tab has six or more items, a block
number is displayed as "01/02".
Select or
the screen.
8
to scroll items up or down on
When setting the parameters in the Key
Operator Mode, enter the password (8
digits), and then select "OK".
5
Change the settings using the
following operations.
Selecting an item
Select a desired item, and then select "OK".
Ex: When setting "01 Density (HOME)" in
the Key Operator mode of the Fax/Email
Settings (See page 45)
Entering numbers
Select "Input", and enter the number, and
then select "OK".
Ex: When setting "27 Power Save Mode
Timer" in the Key Operator mode of the
General Settings (See page 14)
1
1 2
2 3