EY3544-U1
Ref. No. 1C
Procedure 1A → → → → 1B → → → → 1C
IHOW TO DISASSEMBLE
Ref. No. 1D
Procedure 1A → → → → 1B → → → → 1D
GEAR CASE
or MOTOR
Removal of the blade clamp block.
1. Loosen four screws (M5X18) where tightening on the gear
housing.
ASSEMBLY.
Removal of the housing.
1. Loose seven housing screws (4X18).
2. Open the housing B.
3. Take out the motor with gear case assembly from the housing A.
4