COLOR TELEVISION AV-29JP14 AV-29VP14 AV-21VP14 EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’s features ... 3 Remote control buttons and basic functions ... 4 TV buttons and functions ... 6 Setting up your TV ... 7 Basic setting for picture ... 9 Advanced setting for picture ...
Page 2
Never rub it forcefully. Never use any cleaner or detergent on it. Thank you for buying this JVC color television. 7 If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket.
Knowing your TV’s features Main features CLOSED CAPTION FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press. AI ECO AI VOLUME Confirm your TV’s functions Some functions written in this instruction manual may not be available for your TV. Please see the chart below and check the functions that are equipped for your TV’s model number.
Remote control buttons and basic functions No. Press POWER Turn on or off the TV from standby mode. MENU/OK Display menu and confirm selected function. 5 / ∞ / 2 / 3 Select and adjust menu function. CHANNEL -/+ Select the desired channel number. VOLUME -/+ Adjust the volume level.
Page 5
Remote control buttons and basic functions (continued) How to operate menus and menus locations Operation Press the MENU/OK button 2. Display the MENU Press 5/∞ buttons 3 to choose a Display the top menu menu title. Then press MENU/OK button 2. Press 5/∞...
21VP14 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Front of the TV AV-29JP14 POWER IN (VIDEO-3) MENU CHANNEL VOLUME L/MONO AV-21VP14 MENU Rear of the TV AV-29JP14 AV-21VP14 COMPONENT VIDEO-1 (VIDEO-2) OUTPUT INPUT...
• It the remote control does not work properly, fit new COMPONENT VIDEO-1 (VIDEO-2) OUTPUT INPUT INPUT Turn on the TV by pressing the main power button. OVER JVC logo appears on the screen. / MONO MONO batteries. The supplied batteries are for testing, not regular use.
Page 8
If the JVC logo does not appear, use AUTO PROGRAM function to make the initial settings. This function is located in the INSTALL menu. If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
Basic setting for picture COLOR SYSTEM You can select the appropriate color system when the picture is not clear or no color appears. Press the COLOR SYSTEM button to select a setting. In TV mode: NTSC 3.58 MHz (Fixed). In VIDEO mode: AUTO SECAM NTSC4.43...
Page 10
Basic setting for picture (continued) Adjusting the picture – USER You can adjust the desired picture setting when selecting USER in PICTURE MODE. Select the USER in PICTURE MODE under PICTURE menu. ❇ PICTURE menu MENU USER Select the PICTURE SETTING in PICTURE menu, then adjust the setting.
Advanced setting for picture AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. Mild contrast (recommended). Even contrast. Cancel the function. To operate this function with a menu: ❇...
Basic setting for sound SOUND MODE You can choose the desired sound setting. Select the SOUND MODE in SOUND menu, then choose the setting. ❇ MENU SOUND menu SOUND MODE USER You can change this sound setting as you like. Select USER and adjust the frequencies in EQUALIZER (100, 300, 1K, 3K, 8K Hz).
Advanced setting for sound CINEMA SURROUND You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. Cancel the function. Listen to sound with less wider audience effect. HIGH Listen to sound with more wider audience effect. MONO Listen to mono sound with stereo effect.
Favorite channel and video setting To register the favorite channel You can register and recall 4 favorite channels by using the color buttons (red, green, yellow, blue). In TV mode, select a TV channel (CH02-CH69, CC01-CC125) you desired to register. Press and hold a color button for 3 seconds or more.
Customized setting You can reduce the noise. Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function. ❇ PICTURE menu MENU VNR is turned off. AUTO Effect of VNR is automatically controlled. Effect of VNR becomes minimum level.
Page 16
Customized setting (continued) AUTO SHUTOFF You can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast. Select AUTO SHUTOFF in INSTALL menu, then choose ON or OFF.
TV channel presetting To register the TV channels automatically You can register the TV channels into the TV’s channel list automatically. Display the INSTALL menu. ❇ INSTALL menu MENU Choose AUTO PROGRAM, then press the MENU/OK button. Press the 5/∞ button to select AIR or CABLE, then press the MENU/OK button.
• Note that connecting cables are not supplied. Connecting to front video input terminal AV-29JP14 Front of TV IN (VIDEO-3) L/MONO Headphones AV-21VP14 Connecting to rear component/video input terminal and output terminal Rear of TV Rear of TV Camcorder or TV game MENU...
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • No picture, • Deactivate the BLUE BACK function if it is turned no sound • Snowy picture • Check the aerial cable and its connection with the •...
Headphone jack: Stereo mini jack (3.5 mm diameter) Sound-multiplex systems MTS (Multi-Channel Television Sound) Power consumption AV-29JP14: 166 W AV-29VP14: 166 W AV-21VP14: 121 W Screen size (Visible area) AV-29JP14: 676.0 mm AV-29VP14: 676.0 mm AV-21VP14: 505.5 mm Design and specifications subject to change without notice.