Epson Stylus Pro 3800 Service Manual page 168

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
7. Carry out step 4. of the "4.3.10.2 TIMING BELT, PF"
screws of the HOUSING, LOWER.
8. Lift up the left side of the main frame, and remove the PRESSURE, PUMP,
ASSY., from the main frame. See Figure 4-99.
When installing the PRESSURE, PUMP, ASSY, be sure to insert
the hook and rib on the PRESSURE, PUMP, ASSY. into the
positioning holes on the main frame.
PRESSURE, PUMP, ASSY.
rib
DISASSEMBLY & ASSEMBLY
(p185), and remove the two
Positioning points
hook
Disassembly/Assembly Procedure (Group 1)
HOUSING, LOWER
Figure 4-99. Removing the PRESSURE, PUMP, ASSY.
Revision C
PRESSURE, PUMP, ASSY.
168