Epson Stylus Pro 7700 Service Manual page 233

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.3.4 Sub Board Assy; B
1. Remove the Control Panel. (p203)
2. Remove the IC Cover R and the IC Shaft Cover R.
3. Remove the Maintenance Tank R.
4. Remove the Right Cover. (p209)
5. Disconnect all the cables and FFCs on the Sub Board Assy; B.
6. Remove the four screws, and remove the Sub Board Assy; B.
A) Silver, Phillips, Bind machine screw M3x6: four pieces
DISASSEMBLY & ASSEMBLY
(p206)
(p208)
Disassembly and Assembly Procedure
CN219
CN213 CN222
CN227
CN224
CN223
CN220
CN214
CN226
CN221
CN202
Figure 4-54. Connector locations
- Right side -
Figure 4-55. Removing the Sub Board Assy; B
Revision I
CN206 CN229
CN216
CN205
CN218
CN207
CN217
CN204
CN201
CN200
Sub Board Assy; B
A
233
Confidential