Jvc colour video monitor instruction manual (16 pages)
Summary of Contents for JVC TM-A210G
Page 1
MANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI INSTRUCCIONES : MONITOR DE VIDEO A COLOR TM-A210G For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.
Page 2
INSTRUCTIONS COLOR VIDEO MONITOR TM-A210G Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities.
FCC INFORMATION (U.S.A. only) CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
POWER CONNECTION The power supply voltage rating of this product is 120 V AC (For U.S.A. and Canada only) and 220 – 240 V AC (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries.
CONTROLS AND FEATURES FRONT VIEW <Front Panel> Chroma/Phase button CHROMA/ PHASE] Press this button to activate the picture color density adjustment mode or picture hue adjustment mode. Each time you press the button, the adjustment item changes. Ô Picture color density Adjust the value with the VOLUME/SELECT buttons Also used as a control button in the menu function mode.
REAR VIEW <Rear Panel> Audio A terminals [AUDIO A IN/OUT] Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO A terminals The output terminal is bridge-connected. : Audio signal input terminal OUT : Bridge-connected audio signal output terminal Notes: ÷...
Page 7
CONTROLS AND FEATURES REAR VIEW <Rear Panel> To AC outlet (120 V AC, 50 Hz/60 Hz) For U.S.A. and Canada To AC outlet (220 – 240 V AC, 50 Hz/60 Hz) For Europe For the United Kingdom AC inlet [AC IN] Power input connector.
HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION 1. Press the POWER switch to turn on the power. _ ON : Power turns ON. (Power indicator: lit) — OFF : Power turns OFF. (Power indicator: unlit) 2. Press the INPUT SELECT buttons to choose input. Select video/audio signals input to terminals on the rear panel.
HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE <MENU> SCREEN MODE (SETTING) You can set the following menu items. Set them depending on your needs. • SHARPNESS • ASPECT RATIO • COLOR SYSTEM • COLOR TEMP. 1. Press the MENU button. MENU The <MENU>...
Page 10
DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING) You can set the following set-up menu items. • H. POSITION • CONTROL LOCK • WHITE BALANCE • STATUS DISPLAY Notes: ÷ Parameter for H. POSITION can be set separately depending on the video input (Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front panel.
Page 11
HOW TO USE THE MENU FUNCTIONS Set-up menu items H. POSITION Adjusts the horizontal position of the screen (+ : Horizontal position shifts to the right/–: Horizontal position shifts to the left) WHITE BALANCE Adjusts the white balance DRIVE R.DRIVE Adjusts red level B.DRIVE Adjusts blue level...
HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP MENU> RESET MODE You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and the volume level to their factory-set (initial) values. 1. Press the Power ( ) switch to turn the power OFF ( —...
BASIC CONNECTION EXAMPLE Notes: • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. •...
Page 14
7 VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) Audio (Audio signal cable) Video Camera Y/C (S-video) (Y/C (S-video) signal cable) Video Monitor : Signal Flow Audio (Audio signal cable) Video Monitor Y/C (S-video) (Y/C (S-video) signal cable)
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems No power supply. Is the power plug loosened or disconnected?
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly. * Dimensions and weight are approximate. * E. & O. E. Design and specifications subject to change without notice. TM-A210G Color video monitor PAL, NTSC (3.58)
Page 17
7 Dimensions < Front View > 476 (18-3/4) 416.4 (16-1/2) CHROMA CONTRAST VOLUME/SELECT MENU PHASE BRIGHT INPUT SELECT 382.8 (15-1/8) * Asterisks ( ) are used to indicate front panel dimensions. 7 Y/C (Mini DIN 4 pin) terminal specification Unit : mm (inch) <...