Table of Contents
Advertisement
Quick Setup
Search Codes
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the P
OWER
3) Press the P
OWER
4) If there was a response, press S
repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the remote
control that came with your equipment.
5) Press S
to exit.
ET
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to "MONITOR" and the other 2-way selector switch to
"VCR" or "DVD".
2) Press the VCR or DVD P
release.
3) Press the VCR or DVD P
4) If there was a response, press S
repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for the DVD
player), and there is no response, use the remote control that came with your equipment.
5) Press S
to exit.
ET
28
and S
buttons. Hold for at least three seconds and release.
ET
button on the remote, and see if the cable or satellite box responds.
. The codes are now set. If there was no response,
ET
and S
OWER
ET
button, and see if the VCR or DVD responds.
OWER
. The codes are now set. If there was no response,
ET
buttons. Hold for at least three seconds and
Advertisement
Table of Contents
