Motorola ATRIX User Manual page 39

• To disconnect a device, turn off the device, or touch
the device name in the devices list and
Disconnect
touch Menu >
• To turn off Bluetooth power: Touch Menu
Settings Wireless & networks
>
Wi-Fi networks
To connect a network in your range:
Settings
1 Touch Menu >
Wi-Fi settings
> .
Wi-Fi
2 Touch to turn on and scan. If Wi-Fi is already
on, touch Menu
networks it finds within range.
Tip: To show your phone's MAC address or other
Wi-Fi details, touch Menu
3 Touch a network to connect. If necessary, enter
pass codes from the network administrator and
Connect
touch .
When Wi-Fi power is on and your phone finds a
network you've used, it automatically reconnects and
shows in the status bar.
To turn off Wi-Fi power: Touch Menu
Wireless & networks
>
.
Bluetooth
>
Wireless & networks
>
Scan
> . Your phone lists the
Advanced
> .
Settings
>
Wi-Fi
.
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide
portable, convenient internet access to other Wi-Fi
> enabled devices.
.
Note: Keep it secure. To protect your phone and
hotspot from unauthorized access, it is strongly
recommended that you set up hotspot security (WPA2
is the most secure), including password.
To set up your phone as a Wi-Fi hotspot:
1 Turn off Wi-Fi power by touching Menu
Settings
2 Touch Menu
Tethering & Mobile hotspot
>
3 Touch
4 Touch
security and configuration:
• SSID—Enter a unique name for your hotspot.
• Security—Select the type of security you want:
Open
password that others will need to access your
Wi-Fi hotspot.
>
Note:
• Channel—If you notice interference after your
hotspot has been active for a while, you can try
different channels.
Wireless & networks
>
Settings
> >
Mobile hotspot
to turn on the hotspot.
Mobile hotspot settings
WPA2 WPA2
or . For
WPA2
is recommended by IEEE.
Bluetooth™ & Wi-Fi connections
>
Wi-Fi
> .
Wireless & networks
to change hotspot
, enter a unique
37