Location Of Parts And Controls; Front Panel - Sony MB-X6 User Manual

Tuner base unit
Hide thumbs Also See for MB-X6:
Table of Contents

Advertisement

Reading the CD-ROM manual
To read the operating instructions contained on the CD-
ROM, do the following.
1
Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your browser.
If it does not appear automatically in the browser,
double-click on the index.htm file on the CD-ROM.
2
Select and click on the operation manual that you want
to read.
This opens the PDF file of the operation manual.

Location of Parts and Controls

Front panel

a POWER switch
Turns the power on and off.
Note
Before turning on the MB-X6, be sure to turn down the
volume on the equipment connected to the MIX OUTPUT
connector and the TUNER OUTPUT connectors of the
MB-X6. Otherwise, noise may be produced when the
power is turned on.
b Front cover
This cover holds the tuner units.
Remove the front cover when installing or uninstalling the
tuner units.
For details, see "Installing the tuner units" on page 10.
c Blank panels
Remove these panels to install the tuner units.
For details, see "Installing the tuner units" on page 10.
8
Location of Parts and Controls
Memo
The files may not be displayed properly, depending on the
version of Acrobat Reader. In such a case, install the latest
version you can download from the URL mentioned in
"Preparations" above.
Note
If you have lost or damaged the CD-ROM, you can
purchase a new one to replace it. Contact your Sony
service representative.
d Tuner slots
Each slot (A to F) can hold a tuner unit, up to 6 tuner
umits in total.
For details, see "Installing the tuner units" on page 10.

Advertisement

Table of Contents
loading

Table of Contents