Connection Settings - Nokia 6260 User Manual

Anykey answer
• Select On, and you can answer an incoming call by briefly pressing any key,
except ,
Line in use (network service)
• This setting is shown only if the SIM card supports two subscriber numbers,
that is, two phone lines. Select which phone line
use for making calls and sending short messages. Calls on both lines can be
answered irrespective of the selected line.
Note: You cannot make calls if you select
to this network service.
To prevent line selection, select
card. To change this setting, you need the PIN2 code.

Connection settings

Go to Connection
Access points
Here you can see a short explanation for every setting that may be needed for
different data connections and access points. If you have not yet used your phone
to make a WAP connection, you may need to contact your service provider for
assistance with the first-time connection.
Many service providers require you to use an IAP for your default access point.
Other service providers allow you to use a WAP access point. Contact your service
provider for more information.
Copyright © 2004 Nokia. All rights reserved.
, and .
Line change→Disable
settings.
(Line 1 or Line 2) you want to
Line 2 and have not subscribed
if supported by your SIM
125