Samsung SDS-P3042 User Manual page 59

A backup window appears.
You can directly access it from the "Live screen menu".
(Page 23)
4. Use direction buttons (▲▼_ +) to move to a desired
item, and set the value.
• Backup Range : Sets the <Start> and <End> time for the
backup.
• Channel : Sets the channel to backup.
You can select multiple channels.
• Device : Select a backup device from the recognized
devices.
• Type : Sets the backup data format.
- DVR : Saved data can be played back only by the DVR.
- AVI : You can set recording options when sensor, motion, image loss detection or tampering event
occurs.
If you need to install a codec in Windows, run the x264_dvr.exe file in the codec folder that is created when you back
`
up an AVI file.
- SEC : Saves data in the Samsung's proprietary format with built-in viewer, which supports immediate
playback on a PC.
• File Name : You can set the back file name.
Refer to "Using Virtual Keyboard". (Page 35)
`
• Check capacity : Shows the size of the selected backup data, used and available capacity of the selected
backup device.
• Overlap : Shows a list of overlapping data on a same time according to the number of data.
It appears when one channel has multiple data on a certain time point due to changing of time or time zone
settings, etc.
Refer to time and time zone of "Setting the Date/Time/Language". (Page 32)
`
5. When the backup setup is done, press <OK>.
If no available device is recognized for backup, <OK> button is not activated.
`
The application may slow down during the backup.
J
`
You can switch to the menu screen during the backup in operation, but playback of data is not available.
`
The data can be played back on a Webviewer while the backup is in progress but audio does not function.
`
When a memory device is used for backup, it is not available to use the full capacity of the media since the system
`
consumes a part of its capacity.
If backup has failed, select "Device > Storage Device" and check the free space of the HDD and check also if the
`
HDD is properly connected.
Pressing the <Exit> during the backup will return to the previous menu, while the backup progresses.
`
M
Backup
 Start 2013-01-01 00:01:06  End 2013-01-01 08:25:45
 Overlap List0
ALL 1 2 3 4 5 6
9 10 11 12 13 14
 Device USB-Storage  Type SEC
 Folder \20120101\  File Name 0001
Backup
Check capacity
Used
Free
OK Cancel
7 8
15 16
Change
:
:
:
English _59