Home Screen; Set Heat/Cool Mode; Set Fan Mode - GE PROGRAMMABLE THERMOSTAT Operating Instructions Manual

HOME SCREEN

The Home screen is the main display
screen. If you do not press any buttons for
30 seconds, the thermostat will return to
the Home screen.
The large temperature reading on the
Home screen is the current temperature.
The small temperature reading is your
setpoint temperature.
To quickly change the setpoint
temperature: Press UP or DOWN.
Note: The utility company will override
your manually input setpoint when the
unit is set to accept events.
When you receive an event or message from the utility company, 'Event'
or 'Message' appears on the bottom of the Home screen and advises how
many events or messages you have received, and the event's level of
importance.

SET HEAT/COOL MODE

1. When you are in the HOME SCREEN,
press PREV and the screen opposite
appears.
2. Press UP or DOWN to select one of the
following options:
• "Heat", "Cool" or "Off" (Conventional HAVC)
• "Heat", "Emer" (Emergency Heating), "Cool" or "Off" (Heat Pump HVAC)
3. Press MENU or wait 5 seconds to confirm your selection and return to
the Home Screen.

SET FAN MODE

1. When you are in the HOME SCREEN,
press NEXT and the screen opposite
appears.
2. Press UP or DOWN to select "Fan On" or
"Fan Auto".
3. Press MENU or wait 5 seconds to confirm your selection and return to
the HOME SCREEN.
NOTE: When the fan is set to AUTO it only runs when the heating/cooling
system is running.
THU
HEAT
FAN AUTO
NIGHT
THU
HEAT
FAN AUTO
NIGHT
Event (4)
THU
HEAT
FAN AUTO
NIGHT
THU
HEAT
FAN
AUTO
NIGHT
5
APR 15 4:30A
70
F
62
APR 15 4:30A
80
F
62
Message (3)
APR 15 4:30A
70
F
62
APR 15 4:30A
70
F
62