Adjusting The Monitor - JVC KD-AV7100 Instructions Manual

Adjusting the monitor

brightness
1
Display the adjustment bar.
P-04 105.9 MHz
P-05 107.9 MHz
AS PS SCAN
• If no operation is done for about 5 seconds, the
adjustment bar will disappear.
2
Adjust the brightness.
3
Finish the procedure.
Picture adjustment for "AV-IN" and "CAMERA"
When the source is "AV-IN" or "CAMERA" and
video signals are coming in, "Picture Menu" screen
appears in step 1 above.
Press PICTURE on the unit or
select an item to adjust, then adjust it by following
step 2 above.
Sharpness Adjust the sharpness.
Color Adjust the color of the picture—
lighter or darker.
Contrast Adjust the contrast.
Brightness Adjust if the picture is too bright or
too dark.
Tint Adjust the tint if the human skin
color is unnatural.
DX DISP
10
Turning off the monitor
On the touch panel only:
1
2
To turn on the monitor, touch the monitor.
• Pressing any button will also turn on the monitor.
on the remote to
11
On the remote:
1
2
3
TUNER
P-01 87.7
P-02 89.9
Main Menu
TUNER DISC
USB iPod
SET UP
Dimmer function
According to the use of the dimmer function,
connect the ILLUMI lead as follows:
• For Auto Dimmer: Connect it to the car
headlight switch. When you turn on the car
lights, dimmer starts working—Auto Dimmer
• For Constant Dimmer: Connect it to the car
battery (constant 12 V). Dimmer works whenever
you turn on the power.
• For Dimmer Off: Connect it to nowhere.
See also the Installation/Connection Manual
(separate volume).
3:45 PM
ST FM-1 87.5 MHz
MHz
MHz
BACK
AUX IN AV-IN
SD CAMERA
MONITOR
OFF
OPERATIONS