Page 2
Be sure to install this unit in the dashboard of Warning if your car’s ignition has no the car for safety. For installation and ACC position connections, refer to the supplied Be sure to set the Auto Off function “Installation/Connections” guide. (page 38).
Table of Contents Discs Notes on safety ......7 Notes on installation..... . 7 Playing discs .
Page 5
iPod Operations Monitor Adjustment Playing an iPod ......29 Touch panel calibration ....35 Setting the play mode .
Page 6
Index....... . . 57 Support site If you have any questions or for the latest support information on this product, please visit the web site below: http://www.sony-asia.com/section/support http://www.sony-asia.com/caraudio/ Provides information on models and manufacturers of compatible digital audio players.
Notes on safety Notes on installation • Comply with your local traffic rules, laws and • We recommend this unit should be installed by a regulations. qualified technician or service personnel. • While driving – If you try to install this unit by yourself, refer to –...
12 TONE ANALYSIS and its logo are trademarks of Sony This product uses font data which is licensed to Corporation. Sony by Monotype Imaging Inc. or its affiliates. “WALKMAN” and iPhone, iPod, iPod classic, iPod nano, and “WALKMAN” logo are iPod touch are trademarks of Apple Inc., registered...
Playable discs and symbols used in these Operating Instructions This unit can play various video/audio discs. The following chart helps you to check if a disc is supported by this unit, as well as what functions are available for a given disc type. Disc symbol in manual Disc format DVD VIDEO...
Location and function of controls/terminals Main unit G USB terminal For details, see the pages listed below. Remove the cap to connect a USB device. A Z (Eject) button page 17 H Volume control dial B Reset button page 14 I SOURCE/OFF button Press to turn on the power/change the source: C Receptor for the remote commander...
Page 11
A “Source List” key Screen displays Touch to open the source list. When no source is selected: B “Top” key Touch to open the source list. C Clock page 42, 45 Source List (Close) key Touch to close the menu. E “ATT”...
RM-X170 Remote Commander E EQ (Equalizer) button • The remote commander can be used to operate the audio controls. For menu operations, use Press to select an equalizer curve from 7 the touch panel. music types (“Xplod”/“Vocal”/“Edge”/ • For details, see the pages listed below. “Cruise”/“Space”/“Gravity”/“Custom”/ •...
J .m/M> buttons *1 When playing with PBC functions. *2 Operation differs depending on the disc (page 18). Radio: *3 When two auxiliary devices are used. Press to tune to stations automatically. Press and hold to find a station manually. Note The remote commander will not operate when the unit Disc*...
• For details on setting the subwoofer connection Getting Started status, see page 41. • For details on setting the listening position, see Resetting the unit “Optimizing sound for the listening position — Intelligent Time Alignment” on page 33. Before operating the unit for the first time, or •...
Reception controls Radio Touch the display if the reception controls are not Listening to the radio displayed. Touch “Source List,” then “Tuner.” The radio reception display appears, and the Source List preset list is displayed automatically. Source List Receive Preset Band Memory Menu...
Reception indications Receiving stored stations Select the band, then touch “Preset List.” Touch the desired number (“P1” to Source List “P6”). Receive Preset Overview Band Menu List List FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal.
Selecting PTY Discs During FM reception, touch “PTY List.” Playing discs The PTY list appears if the station is transmitting PTY data. Depending on the disc, some operations may be To scroll the list, touch v/V. different or restricted. Touch the desired program type. Refer to the operating instructions supplied with The unit searches for a station broadcasting your disc.
Playback controls Touch the display if the playback controls are not displayed. Source List Common to all discs/formats Source List Play Menu List SHUF Album Play Menu Control SHUF “Source List” Touch to open the source list. (page 11) “ATT” Touch to attenuate the sound.
“DVD Control” Playback indications Touch to open the DVD control menu, Touch the display if the indications are not which contains the following items. displayed. • “Audio”: Touch repeatedly to select For audio discs, some indications are always the audio language/format. (page 20)* displayed during playback.
Configuring audio settings Using PBC (playback control) functions Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. The PBC menu interactively assists with Changing the audio language/ operations while a PBC-compatible VCD is played.
Changing the audio channel Locking discs — Parental control MPEG-4 When playing a VCD/CD/MP3/WMA/AAC/ * Excluding DVD-R/DVD-R DL/DVD-RW in VR mode. Xvid/MPEG-4, you can listen to both the right and left channel, only the right channel, or only You can lock a disc, or set playback restrictions the left channel via both the right and left according to a predetermined level such as speakers.
Repeat and shuffle play Changing the area and its movie rating level The restriction levels can be set based on the area MPEG-4 and its movie ratings. During playback, touch “Play Menu,” While no source is selected, touch then the “Repeat” or “Shuffle” box “Source List,”...
The shuffle options and switching order of each Direct search play disc/format are indicated below. Disc/format Options “OFF”: Returns to normal play MPEG-4 mode. You can directly locate a desired point by “Title”: Plays chapters in the specifying the title number, chapter number, etc. current title in random order.
• This unit cannot recognize USB devices via a USB Support site hub. • Be sure to use the USB cable supplied with the http://www.sony-asia.com/section/support device if a cable is needed when making a USB http://www.sony-asia.com/caraudio/ connection. Notes on playback •...
In order to group tracks by channel or mood, your mood — SensMe™ track sound patterns need to be analyzed by 12 TONE ANALYSIS, which is loaded with Sony’s unique “SensMe™ channels” and “Content Transfer.” “SensMe™ mood” features automatically group With the USB device connected to your...
Registering a USB device using Playing tracks in channels “SensMe™ Setup” — SensMe™ channels USB device registration is required to enable the “SensMe™ channels” automatically group tracks SensMe™ function on the unit. into channels by their tunes. You can select and play a channel that fits your mood, activity, etc.
Page 27
Channel list “SensMe™ channels” playback controls and indications x Recommended, Shuffle All “Morning” (5:00 AM – 9:59 AM) “Daytime” (10:00 AM – 3:59 PM) “Evening” (4:00 PM – 6:59 PM) “Night” (7:00 PM – 11:59 PM) Shuffle All “Midnight” (12:00 AM – 4:59 AM) Plays tracks recommended for each time of day.
“SensMe™ mood” playback controls Playing tracks in mood maps and indications — SensMe™ mood “SensMe™ mood” distributes tracks as dots on a two-axis mood map, based on the characteristics of the individual tracks. Fast Mood By touching the point on the map according to your mood, a circle appears around the touched Type point, and the tracks inside the circle are played.
You can control iPod playback in the same way as disc playback. For details, see “Playback Support site controls” on page 18. For details on playback indications, see http://www.sony-asia.com/section/support “Playback indications” on page 19. http://www.sony-asia.com/caraudio/ To stop playback In these Operating Instructions, “iPod” is used as Press and hold (SOURCE/OFF) for 1 second.
Touch the desired play mode. Operating an iPod directly To start playback, touch the desired item(s) in the list. — Passenger control To scroll the list, touch v/V. You can directly operate an iPod connected to To skip items of the selected play this unit.
Touch the desired file. Useful Functions Playback of the selected file starts. Listing up tracks/images/video Searching for a track by files — List listening to track passages — ZAPPIN™ Selecting a track/image/video file MPEG-4 While playing short track passages from a disc or You can list up albums/folders/tracks/images/ USB device in sequence, you can search for a video files, and select a desired one to play.
Using Gesture Command Sound Adjustment You can perform frequently-used operations by Selecting the sound quality drawing the following command stroke on the — EQ7 reception/playback display. Do this You can select an equalizer curve from 7 music types (“Xplod,” “Vocal,” “Edge,” “Cruise,” Radio reception: “Space,”...
Optimizing sound for the Other equalizer types are also adjustable. listening position — Intelligent Time Alignment Adjusting the sound characteristics The unit can change the localization of sound by delaying the sound output from each speaker to The sound balance between left and right suit your position, and simulate a natural sound speakers (“Balance”) and front and rear speakers field with the feeling of being in the center of it...
Calibrating the listening position Speaker configuration and — Intelligent Time Alignment Tune volume setup You can precisely calibrate your listening position from each speaker so that the sound Creating a virtual center speaker delay reaches the listener more correctly. — CSO Before starting, measure the distance between your listening position and each speaker.
Adjusting the speaker volume Monitor Adjustment You can adjust the volume level of each Touch panel calibration connected speaker. The adjustable speakers are “Front R” (Front Touch panel calibration is required if the Right), “Front L” (Front Left), “Surround L” touching position does not correspond with the (Rear Left), “Surround R”...
Customizing the picture Adjusting the picture — Picture EQ The options “Custom 1” and “Custom 2” of Picture EQ allow you to make your own picture setting by adjusting the picture tones. You can adjust the picture to suit the interior brightness of the car.
Selecting the aspect ratio Settings The setting menu includes the following You can change the screen aspect ratio. categories. The options are indicated below. • “General”: General settings (page 38) “Normal”: Picture with 4:3 • “Sound”: Sound settings (page 40) aspect ratio (regular picture).
General settings c “General” c the desired item c the desired option. For details on this procedure, see Touch “Basic setting operation” on page 37. For details, see the pages listed below. “z” indicates the default setting. Item Option Purpose Unit status Security Control (page 45) –...
Page 39
Item Option Purpose Unit status Key Illumination ON (z) To turn on the button illumination. Any status To turn off the button illumination. Rotary Commander Default (z) To use in the factory-set Changes the operative position. Any status direction of rotary commander Reverse To use on the right side of controls.
Sound settings c “Sound” c the desired item c the desired option. For details on this procedure, see “Basic Touch setting operation” on page 37. For details, see the pages listed below. “z” indicates the default setting. Item Option Purpose Unit status EQ7 (page 32) OFF (z)
Page 41
Item Option Purpose Unit status Rear/Sub Out Rear To output audio signals to Switches the audio output the rear speakers No source between the rear speakers and (amplifier). selected subwoofer. Sub (z) To output audio signals to the subwoofer. RBE (Rear Bass Enhancer) OFF (z), To select the mode.
Screen settings c “Screen” c the desired item c the desired option. For details on this procedure, see “Basic Touch setting operation” on page 37. For details, see the pages listed below. “z” indicates the default setting. Item Option Purpose Unit status Screen Select (page 35) –...
DVD and other playback settings c “Visual” c the desired item c the desired option. For details on this procedure, see “Basic Touch setting operation” on page 37. For details, see the pages listed below. “z” indicates the default setting. Item Option Purpose...
Page 44
Item Option Purpose Unit status Monitor Type 16:9 (z) To display a wide picture. Selects an aspect ratio suitable Suitable when connecting for the connected monitor. to a wide-screen monitor or (The screen aspect ratio of this a monitor with a wide unit also changes.) mode function.
Setting the security code Setting the clock This unit has a security function to discourage The clock uses a 12-hour indication. theft. Enter a 4-digit number as your security Touch “Source List,” then code. The general setting menu appears. If not, Once the security function is activated, you need touch “General.”...
Setting the type of device Using Optional Equipment By setting the type (video or audio) of each connected device, the background screen can be Auxiliary audio/video switched accordingly. equipment While no source is selected, touch “Source List,” then The general setting menu appears. If not, You can connect up to 2 optional devices, such as touch “General.”...
Rear view camera settings Additional Information You can display setting items on the picture from Precautions the rear view camera to assist operation. This setting is available only when: • Cool off the unit beforehand if your car has been –...
Notes on finalizing discs Notes on discs The following discs are required to be finalized to play on this unit. • Do not expose discs to direct sunlight or heat • DVD-R/DVD-R DL (in video mode/VR mode) sources such as hot air ducts, nor leave it in a car •...
About MP3 files About MPEG-4 files • MP3, which stands for MPEG-1 Audio Layer-3, is MPEG-4 files meeting the following a music file compression format standard. It requirements can be played. Playback is not be compresses audio CD data to approximately 1/10 guaranteed for all MPEG-4 files meeting the of its original size.
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, Fuse (10A) consult your nearest Sony dealer.
For details on compatible editions or Service Packs, The following checklist will help you remedy visit the following support site: problems you may encounter with your unit. http://www.sony-asia.com/section/support Before going through the checklist below, check the http://www.sony-asia.com/caraudio/ connection and operating procedures.
Page 53
Operation of the remote commander is not Picture possible. There is no picture/picture noise occurs. If the Monitor Off function is activated (no lighting), • A connection has not been made correctly. operation of the remote commander is not possible •...
Page 54
Sound is noisy. USB playback Keep cords and cables away from each other. Items cannot be played via a USB hub. This unit cannot recognize USB devices via a USB hub. Disc operation Items cannot be played. The disc cannot be loaded. Reconnect the USB device.
USB device. Offset There may be an internal malfunction. t Check the connection. If the error indication remains on the display, consult your nearest Sony dealer. Output connection failure. The connection of speakers/amplifiers is incorrect.
Language code/area code list Language code list The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona...