Advertisement
Common Features
THD: less than 0.04% at 1kHz
I
PWM Regulated MOS-FET Power Supply
I
MOS-FET Output Stage
I
Max. Power Output of 800W
I
Class-D Circuit
I
Variable Input RCA Level Control (0.3 - 6V)
I
Variable Bass Boost Control (45Hz, 0-18dB)
I
Gold-Plated RCA Jacks
I
Gold-Plated Block Terminals (Power: 4AWG/ Speakers: 8AWG)
I
Protection Circuitry (Thermal/Short Circuit/ Overload/DC Offset)
I
Anti-Pop Circuit
I
Control Panel on the Top (Cover)
I
Blue LED Illumination
I
KS-AR8001D
Digital Mono Power Amplifier
Continuous Power Output: 700W RMS x 1 at 4 ohms,
I
700W RMS x 1 at 2 ohms
Frequency Response: 20–300Hz (0, -3dB)
I
S/N: more than 80dBA at 2Vrms
I
LPF (50–300Hz, -18dB/oct)
I
Subsonic Filter (20–50Hz ,-18dB/oct )
I
Phase Control (0/180 degree)
I
KS-AR8002D
Digital 2-Channel Power Amplifier
Continuous Power Output: 150W RMS x 2 at 4 ohms,
I
170W RMS x 2 at 2 ohms bridged
2- or 1-Channel Operation
I
Frequency Response: 5–40kHz (0, -3dB)
I
S/N: more than 80dBA at 2Vrms
I
HPF (30–500Hz, -18dB/oct)
I
LPF (30–500Hz, -18dB/oct)
I
Subsonic Filter (18Hz,-18dB/oct )
I
KS-AR8004D
Digital 4-Channel Power Amplifier
Continuous Power Output: 120W RMS x 4 at 4 ohms,
I
130W RMS x 4 at 2 ohms bridged
4-, 3- or 2-Channel Operation
I
Frequency Response: 5–40kHz (0, -3dB)
I
S/N: more than 80dBA at 2Vrms
I
HPF (30–500Hz, -18dB/oct)
I
LPF (30–500Hz, -18dB/oct)
I
Subsonic Filter (18Hz ,-18dB/oct )
I
8
10"
7.25"
Space-Saving Installation Options
Horizontal Hanging
Vertical
Unique Floating Isolated Structure
Eliminates Amplifier Noise
Analog Feedback
Digital Feedback
Input
Gate Driver
Conventional
Power
Input
Stage
Digital Amp
Deadtime
Noise
Control
Gate Driver
Switching Controller
and Output Stage
Switching Noise in Signal
Correct Distortion
Digital Feedback
External (circuit) Improvements
Analog Feedback
Input
JVC's
Gate Driver
Power
Input
Stage
Floating Isolated
Deadtime
Noise
Control
Structure
Gate Driver
Switching Controller
and Output Stage
Internal (IC) Improvements
Based on Fundamental
Revisions
Simple, High-Speed, and Efficient Noise Reduction
AR7000 Series
2.5"
Arsenal Amplifier Design
KS-AR7501D
KS-AR7004
KS-AR7002
KS-AR7001
• Stackable 4-Way Installation
• Top Mount Large Rotary Controls
• High-Grade Design with
Blue Illumination
• Reversible Logo Plate
Large controls all on one side
User-Friendly operation
Cover attached
Stacking
Cascade
Stacking
Feature Comparison Chart
KS-AR7501D
Channel Operation
Mono
Circuit
Class D
Maximum Output
1200W
Continuous Power (RMS)
@ 4
400W RMS x 1
Ω
CEA-2006
@ 2
700W RMS x 1
Compliant
Ω
@ 1
1000W RMS x 1
Ω
Pulse Width Modulated
•
MOS-FET Power Supply
Frequency Response (0, -3dB)
20 - 300Hz
Output
Variable High Pass Filter
(-18dB/oct)
—
Low-Pass
Filter
Variable Low Pass Filter
50 - 300Hz
(-18dB/oct)
20 - 50Hz
Subsonic Filter
Variable
(-18dB/oct)
•
Variable Bass Boost
(0-18dB @ 45Hz)
•
Phase Control (0/180º)
Tri-Mode Operation
—
•
Variable Speaker Level Input
•
Stackable 4-Way Installations
•
Blue Illumination
Output
Low-Pass
•
Wired Bass Boost Remote Ready
Filter
Gold-Plated RCA Input & Output
•
(Pass Through)
Angle Mount Gold-Plated Power
•
& Speaker Terminals
•
Anti-Pop & Protection Circuit
•
Top-Mounted Large Rotary Controls
Cool blue illumination
Superior Cosmetics With
Rock-Solid Arsenal Performance
Arsenal's stack design, smooth cosmetics, high-grade components, and easy-
KS-AR7004
KS-AR7002
KS-AR7001
to-use controls are all coupled in a package that is backed by a full two-year
warranty. Each amplifier has the same frame size, so up to three amplifiers can
4/3/2CH
2/1CH
Mono
be stacked vertically, while still maintaining access to the adjustment controls on
Class AB
Class AB
Class AB
each amp. Stack-mounting uses less space and creates a unique look to every
800W
800W
600W
custom installation. Every top-mounted control dial is large and easy to adjust,
100W RMS x 4
150W RMS x 2
250W RMS x 1
without the need to use additional tools for tuning. Power and speaker terminals
140W RMS x 4
230W RMS x 2
400W RMS x 1
are also hidden, gold-plated, and angled for improved wire management
—
—
—
and power transfer. Even the Arsenal badge can be inverted for back seat or
•
•
•
subwoofer box mounting.
5 - 50,000Hz
5 - 50,000Hz
20 - 300Hz
At the core of these amplifiers are Pulse-Width Modulation Regulated
MOS-FET Power supplies, which deliver a more consistent power supply
30 - 500Hz
30 - 500Hz
—
and ensure that maximum power output and clarity are achieved, even if the
30 - 500Hz
30 - 500Hz
50 - 300Hz
input power is unstable. Arsenal Mono amplifiers also feature Low-Pass and
20 - 50Hz
20Hz
20Hz
Variable
Subsonic filters, as well as a Variable Bass Boost for more specific low-end
(-12dB/oct)
(-12dB/oct)
(-18dB/oct)
response and control. Each 2-CH and 4-CH amp also features both variable
•
•
•
Low and High-Pass filters for even greater system flexibility. The AR7501D
—
—
•
and AR7001 can even be connected to a Wired Bass Boost Remote Control
•
•
Kit (optional), which provides level control from the front seat of the vehicle.
—
Providing powerful performance, wrapped up in a smooth, sleek package
•
•
•
- JVC Arsenal Amps are built strong with unique and exceptional style.
•
•
•
•
•
•
—
—
•
•
•
•
RM-RK130
•
•
•
Works with KS-AR7001, KS-AR7501D,
•
•
•
and KS-AR8001 Subwoofer Amplifiers
•
•
•
Optional wired bass boost remote
Terminals all on one side
Compact wiring
9
Advertisement
